Product categories
Selected pack
Skip to product information
BXG-PL10-G02 304 Stainless Male Push-In Elbow - 10mm Tube OD, G 1/4
$12.29
One complete 304 stainless 90-degree push-in elbow with a male threaded port. Match tube outside diameter and the actual female mating thread.
Applications & specifications · Quick order all packs
Ships from China · 5–7 calendar days preparation. Shipping · Returns
BXG-PL10-G02 304 Stainless Male Push-In Elbow - 10mm Tube OD, G 1/4
Connect compatible pneumatic tubing to a matching female-threaded equipment port. Select by tube outside diameter and the supplied thread designation. The 90-degree elbow layout suits compatible valves, automation equipment and general air-line routing.
Included in one sales unit
One complete push-in fitting with the supplied release collar and seals assembled. Tubing, tools, sealant and equipment are not included.
The supplier uses a representative series illustration for this configuration; appearance and dimensions vary with the selected tube/hose and thread size. The specification table identifies the ordered model.
Model & Reference Codes
| Original single-unit SKU | BXG-PL10-G02 |
|---|---|
| Connection type | 304 Stainless Push-In Fittings |
| Sales unit | 1 complete assembled fitting |
| Material / construction | 304 stainless steel elbow body with supplied green thread seal |
| Tube OD | 10 mm |
| Supplied male thread | G 1/4 |
| Approx. hex width | 17 mm |
| Unit weight | 0.0368 kg |
Approximate dimensions are retained from original same-model supplier cards. They are not tolerance-controlled production measurements. Nominal thread size alone does not establish port compatibility.
Connect and inspect.
Isolate and fully depressurize the air line. Cut compatible tubing square and remove debris. Push the tube fully into the fitting and gently pull back to check retention. Tighten the threaded connection at the hex, not the release collar. Restore air gradually and check for leakage. To disconnect, depressurize first, press the release collar evenly and withdraw the tube.
Pack quantities
Choose 1 / 2 / 10 fittings per pack. Quantity counts packs; physical sales units equal pack size multiplied by number of packs. The displayed pack price already includes its quantity saving.
0
Total items
Product subtotal
Taxes, discounts and shipping calculated at checkout.
Find your matching configuration
Male Thread Elbow Fittings (PL)
PL elbows route tubing or hose through 90 degrees to a female-threaded equipment port. Compare tube OD or hose ID, thread size and connection mechanism; select one exact model.
Blue-Ring Push-In Elbows 20Nickel Quick-Screw Elbows 20304 Stainless Push-In Elbows 16Brass Hose-Barb Elbows 16
Blue-Ring Push-In Elbows (20)
PL4 · 4 mm tube OD (3)
