MINI PL4-M4 Elbow Screw-Lock Fitting - 4mm Tube OD, M4 Male

MINI PL4-M4 Elbow Screw-Lock Fitting - 4mm Tube OD, M4 Male

A compact MINI screw-lock fitting joins compatible tubing to a matching female equipment thread. PC provides straight routing; PL routes the tube at a right angle. The knurled nut secures the tube over its insert.

Included in one sales unit

1 complete assembled fitting of the selected model, including its fitted lock nut. Tubing, tools, equipment ports, other fittings and boxes are not supplied.

Original PC and PL series photographs illustrate the selected construction. They are series references, not individual photographs of every selectable size. The selected model dimensions are shown separately. Application and disassembly illustrations do not add items to the sales unit.

Model & Reference Codes

Match both the tubing outside and inside diameters to the screw-lock connection. Match the actual female equipment thread and pitch as well. Supplier dimensions are approximate model references, not measured tolerances. Cap width is distinct from the equipment thread size.

Match, seat and lock.

Isolate and fully depressurize before installation or removal. Install the matching male thread using the metal flats and a sealing method suitable for the connection. Cut compatible tubing square and remove debris. Loosen the knurled nut, pass the tubing through it, seat the tubing fully on the insert and tighten the nut. Pull gently to check retention, restore air gradually and leak-check both joints. Fully depressurize before loosening the nut to remove tubing. Confirm the operating limits required by the actual system.

Pack quantities

Choose 1 / 5 / 20 identical complete fittings per pack. Quantity counts packs. Displayed pack prices include the shown savings.