NRL10-04 Rotary Elbow Fitting - 10mm Tube OD, Option 04 Male

NRL10-04 Rotary Elbow Fitting - 10mm Tube OD, Option 04 Male

A rotary elbow fitting connects compatible pneumatic tubing to a matching female equipment port. Select the complete NRL model to match both tube outside diameter and the male thread option.

Included in one sales unit

1 complete assembled NRL elbow rotary fitting. Tubing, machine mounts, tools, other fittings and storage boxes are not included.

Original NRL series photographs illustrate the construction; the selected tube/thread configuration is identified below. The original NRL photograph illustrates the series construction, not an exact-size photograph of every selectable model. Application pictures show equipment and tubes that are not supplied.

Model & Reference Codes

Match the actual equipment thread standard and pitch before ordering. A supplier nominal label or outside-diameter measurement alone does not establish thread compatibility. Approximate thread OD is not a mounting-hole size or a cap body diameter.

Match, connect and inspect.

Isolate and fully depressurize before installation, adjustment or removal. Match tube OD and the actual equipment thread. Tighten the metal threaded end at its hex using a sealing method suitable for the connection; do not use the white body or blue collar as a wrench. Cut compatible tubing square, remove debris and insert it fully. Pull gently to check retention. Restore air gradually and leak-check the tube and threaded joints. To remove the tube, fully depressurize, press the blue collar and withdraw the tube. Confirm the operating limits required by the actual equipment and application.

Pack quantities

Choose 1 / 2 / 10 identical complete fittings per pack. Quantity counts packs. Displayed pack prices include the shown savings.